Difference between revisions of "PEC-REP/Current/PulsePEGuide/Provision"

From Genesys Documentation
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 11: Line 11:
  
 
*Versions:
 
*Versions:
−
**<image-version> = 100.0.000.0012
+
**<image-version> = 100.0.000.0015
−
**<chart-versions>= 100.0.000+0012
+
**<chart-versions>= 100.0.000+0015
 
*K8S namespace pulse
 
*K8S namespace pulse
 
*Project Name pulse
 
*Project Name pulse
Line 47: Line 47:
 
*Pulse:
 
*Pulse:
 
**<pulse-host>
 
**<pulse-host>
−
*Domain:
+
 
−
**<domain> example: site.domain.com
+
{{AnchorDiv|SingleNamespace}}
 +
===Single namespace===
 +
Single namespace deployments have a software-defined networking (SDN) with multitenant mode, where namespaces are network isolated. If you plan to deploy Pulse into the single namespace, ensure that your environment meets the following requirements for inputs:
 +
 
 +
*Back-end services deployed into the single namespace must include the string ''pulse'':
 +
**<db-host>
 +
**<db-name>
 +
**<redis-host>
 +
*The hostname used for Ingress must be unique, and must include the string ''pulse'':
 +
**<pulse-host>
 +
*Internal service-to-service traffic must use the service endpoints, rather than the Ingress Controller:
 +
**<gauth-url-internal>
 +
**<gws-url-internal><nowiki></source></nowiki>
 
|Status=No
 
|Status=No
 
}}{{Section
 
}}{{Section
Line 60: Line 72:
 
'''Prepare the override file:'''
 
'''Prepare the override file:'''
  
−
*Update the <tt>values-override-init-tenant.yaml</tt>  file (GKE):
+
*Update the <tt>values-override-init-tenant.yaml</tt>  file (AKS):
−
*:{{NoteFormat|Enable configurator only for configurations in GKE with VPC scoped DNS, or OpenShift with single namespace.
 
−
}}
 
−
 
 
 
*:<source lang="bash"># Default values for init-tenant.
 
*:<source lang="bash"># Default values for init-tenant.
 
# This is a YAML-formatted file.
 
# This is a YAML-formatted file.
Line 80: Line 89:
 
   # set service domain used to access voice service
 
   # set service domain used to access voice service
 
   # example for GKE VPC case: voice.svc.gke1-uswest1.gcpe002.gencpe.com
 
   # example for GKE VPC case: voice.svc.gke1-uswest1.gcpe002.gencpe.com
−
  # example for OpenShift single namespace: genesys.svc.cluster.local.
 
 
   voiceDomain: "voice.svc.<domain>"
 
   voiceDomain: "voice.svc.<domain>"
 
   # set service domain used to access ixn service
 
   # set service domain used to access ixn service
 
   # example for GKE VPC case: ixn.svc.gke1-uswest1.gcpe002.gencpe.com
 
   # example for GKE VPC case: ixn.svc.gke1-uswest1.gcpe002.gencpe.com
−
  # example for OpenShift single namespace: genesys.svc.cluster.local.
 
 
   ixnDomain: "ixn.svc.<domain>"
 
   ixnDomain: "ixn.svc.<domain>"
 
   # set service domain used to access pulse service
 
   # set service domain used to access pulse service
 
   # example for GKE VPC case: pulse.svc.gke1-uswest1.gcpe002.gencpe.com
 
   # example for GKE VPC case: pulse.svc.gke1-uswest1.gcpe002.gencpe.com
−
  # example for OpenShift single namespace: genesys.svc.cluster.local.
 
 
   pulseDomain: "pulse.svc.<domain>"
 
   pulseDomain: "pulse.svc.<domain>"
 
   # set configration server password, used when create secrets
 
   # set configration server password, used when create secrets
Line 95: Line 101:
 
   cfgPassword: "password"
 
   cfgPassword: "password"
 
   # common log configuration
 
   # common log configuration
−
   cfgHost: "tenant-<tenant-uuid>.voice.svc.<domain>"
+
   cfgHost: "tenant-9350e2fc-a1dd-4c65-8d40-1f75a2e080dd.voice.svc.<domain>"
 
   
 
   
 
log:
 
log:
Line 112: Line 118:
 
       - ReadWriteMany
 
       - ReadWriteMany
 
     capacity: 10Gi
 
     capacity: 10Gi
−
     class: nfs-client
+
     class: <pv-storage-class-rw-many>
 
   
 
   
 
# * Tenant info
 
# * Tenant info
Line 154: Line 160:
 
## Specifies the security context for all Pods in the service
 
## Specifies the security context for all Pods in the service
 
##
 
##
−
podSecurityContext:
+
podSecurityContext: {}
−
  fsGroup: null
 
−
  runAsUser: null
 
−
  runAsGroup: 0
 
−
  runAsNonRoot: true
 
 
   
 
   
 
## Resource requests and limits
 
## Resource requests and limits
Line 212: Line 214:
 
   - Twitter_Media_Activity.gpb
 
   - Twitter_Media_Activity.gpb
 
   - eServices_Agent_Activity.gpb
 
   - eServices_Agent_Activity.gpb
−
   - eServices_Queue_KPIs.gpb
+
   - eServices_Queue_KPIs.gpb</source>
−
</source>
+
 
−
*Update the <tt>values-override-init-tenant.yaml</tt>  file (OpenShift):
+
*Update the <tt>values-override-init-tenant.yaml</tt>  file (GKE):
−
*:<source lang="bash">
+
*:{{NoteFormat|Enable configurator only for configurations in GKE with VPC scoped DNS.
−
# Default values for init-tenant.
+
}}
 +
 
 +
*:<source lang="bash"># Default values for init-tenant.
 
# This is a YAML-formatted file.
 
# This is a YAML-formatted file.
 
# Declare variables to be passed into your templates.
 
# Declare variables to be passed into your templates.
Line 228: Line 232:
 
   imagePullSecrets: [name: "<docker-registry-secret-name>"]
 
   imagePullSecrets: [name: "<docker-registry-secret-name>"]
 
   
 
   
−
# * Tenant info
+
configurator:
−
# Replace for your values
+
  enabled: true
−
tenant:
+
  # set service domain used to access voice service
−
   # Tenant UUID
+
  # example for GKE VPC case: voice.svc.gke1-uswest1.gcpe002.gencpe.com
−
   id: <tenant-uuid>
+
  voiceDomain: "voice.svc.<domain>"
−
   # Tenant SID (like 0001)
+
   # set service domain used to access ixn service
−
   sid: <tenant-sid>
+
   # example for GKE VPC case: ixn.svc.gke1-uswest1.gcpe002.gencpe.com
 +
  ixnDomain: "ixn.svc.<domain>"
 +
  # set service domain used to access pulse service
 +
  # example for GKE VPC case: pulse.svc.gke1-uswest1.gcpe002.gencpe.com
 +
  pulseDomain: "pulse.svc.<domain>"
 +
   # set configration server password, used when create secrets
 +
   cfgUser: "default"
 +
  # set configration server user, used when create secrets
 +
  cfgPassword: "password"
 +
  # common log configuration
 +
  cfgHost: "tenant-<tenant-uuid>.voice.svc.<domain>"
 
   
 
   
−
# common configuration.
+
log:
−
config:
+
  # target directory where log will be stored, leave empty for default
 +
  logDir: ""
 +
  # path where volume will be mounted
 +
  volumeMountPath: /data/log
 +
  # log volume type: none | hostpath | pvc
 +
  volumeType: none
 +
  # log volume hostpath, used with volumeType "hostpath"
 +
  volumeHostPath: /mnt/log
 +
  # log PVC parameters, used with volumeType "pvc"
 +
  pvc:
 +
    name: pulse-init-tenant-logs
 +
    accessModes:
 +
      - ReadWriteMany
 +
    capacity: 10Gi
 +
    class: nfs-client
 +
 +
# * Tenant info
 +
# Replace for your values
 +
tenant:
 +
  # Tenant UUID
 +
  id: <tenant-uuid>
 +
  # Tenant SID (like 0001)
 +
  sid: <tenant-sid>
 +
 +
# common configuration.
 +
config:
 
   dbName: "<db-name>"
 
   dbName: "<db-name>"
 
   # set "true" when need @host added for username
 
   # set "true" when need @host added for username
Line 358: Line 397:
 
'''Prepare the override file:'''
 
'''Prepare the override file:'''
  
−
*Update the <tt>values-override-dcu.yaml</tt> file (GKE):
+
*Update the <tt>values-override-dcu.yaml</tt> file (AKS):
 
*:<source lang="bash"># Default values for dcu.
 
*:<source lang="bash"># Default values for dcu.
 
# This is a YAML-formatted file.
 
# This is a YAML-formatted file.
Line 435: Line 474:
 
## Specifies the security context for all Pods in the service
 
## Specifies the security context for all Pods in the service
 
##
 
##
−
podSecurityContext:
+
podSecurityContext: {}
−
  runAsNonRoot: true
+
   
−
  runAsUser: 500
 
−
  runAsGroup: 500
 
−
  fsGroup: 0
 
−
   
 
 
## Add labels to all pods
 
## Add labels to all pods
 
##
 
##
Line 531: Line 566:
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       cpu: "8000m"
 
       cpu: "8000m"
−
   # securityContext:
+
   # securityContext: {}
−
  #  runAsUser: 500
 
−
  #  runAsGroup: 500
 
 
   
 
   
 
# * Configuration for the StatServer container
 
# * Configuration for the StatServer container
Line 553: Line 586:
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       cpu: "4000m"
 
       cpu: "4000m"
−
   # securityContext:
+
   # securityContext: {}
−
  #  runAsUser: 500
 
−
  #  runAsGroup: 500
 
 
   
 
   
 
# * Configuration for the monitor sidecar container
 
# * Configuration for the monitor sidecar container
Line 576: Line 607:
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       cpu: "10m"
 
       cpu: "10m"
−
   # securityContext:
+
   # securityContext: {}
−
  #  runAsUser: 500
 
−
  #  runAsGroup: 500
 
 
   
 
   
 
##########################################################################
 
##########################################################################
Line 603: Line 632:
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       cpu: "1000m"
 
       cpu: "1000m"
−
   # securityContext:
+
   # securityContext: {}
−
  #  runAsUser: 500
 
−
  #  runAsGroup: 500
 
 
   
 
   
 
# volumeClaims contains persistent volume claims for services
 
# volumeClaims contains persistent volume claims for services
Line 621: Line 648:
 
     class: <pv-storage-class-rw-once>
 
     class: <pv-storage-class-rw-once>
 
</source>
 
</source>
−
*Update the <tt>values-override-dcu.yaml</tt> file (OpenShift):
+
 
−
*:<source lang="bash">
+
*Update the <tt>values-override-dcu.yaml</tt> file (GKE):
−
# Default values for dcu.
+
*:<source lang="bash"># Default values for dcu.
 
# This is a YAML-formatted file.
 
# This is a YAML-formatted file.
 
# Declare variables to be passed into your templates.
 
# Declare variables to be passed into your templates.
Line 773: Line 800:
 
     namespace:
 
     namespace:
 
     additionalLabels: {}
 
     additionalLabels: {}
 +
 
 
   
 
   
 
##########################################################################
 
##########################################################################
Line 847: Line 875:
 
# * Configuration for the Configuration Server Proxy container
 
# * Configuration for the Configuration Server Proxy container
 
csproxy:
 
csproxy:
 +
  # define domain for the configuration host
 +
  params:
 +
    cfgHost: "tenant-<tenant-uuid>.voice.<domain>"
 
   # resource limits for container
 
   # resource limits for container
 
   resources:
 
   resources:
Line 879: Line 910:
 
     capacity: "1Gi"
 
     capacity: "1Gi"
 
     # class is storage class. Must be set explicitly.
 
     # class is storage class. Must be set explicitly.
−
     class: <pv-storage-class-rw-once></source>
+
     class: <pv-storage-class-rw-once>
 +
</source>
  
 
'''Install the <tt>dcu</tt> helm chart'''<br />To install the <tt>dcu</tt> helm chart, run the following command:
 
'''Install the <tt>dcu</tt> helm chart'''<br />To install the <tt>dcu</tt> helm chart, run the following command:
Line 903: Line 935:
 
'''Prepare the override file:'''
 
'''Prepare the override file:'''
  
−
*Update values in the <tt>values-override-lds.yaml</tt> file (GKE):
+
*Update values in the <tt>values-override-lds.yaml</tt> file (AKS):
 
*:<source lang="bash"># Default values for lds.
 
*:<source lang="bash"># Default values for lds.
 
# This is a YAML-formatted file.
 
# This is a YAML-formatted file.
Line 959: Line 991:
 
## Specifies the security context for all Pods in the service
 
## Specifies the security context for all Pods in the service
 
##
 
##
−
podSecurityContext:
+
podSecurityContext: {}
−
  runAsNonRoot: true
 
−
  runAsUser: 500
 
−
  runAsGroup: 500
 
−
  fsGroup: 0
 
 
   
 
   
 
## Add labels to all pods
 
## Add labels to all pods
Line 1,052: Line 1,080:
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       cpu: "4000m"
 
       cpu: "4000m"
−
   # securityContext:
+
   # securityContext: {}
−
  #  runAsUser: 500
 
−
  #  runAsGroup: 500
 
 
   
 
   
 
# * Configuration for the monitor sidecar container
 
# * Configuration for the monitor sidecar container
Line 1,074: Line 1,100:
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       cpu: "10m"
 
       cpu: "10m"
−
   # securityContext:
+
   # securityContext: {}
−
  #  runAsUser: 500
 
−
  #  runAsGroup: 500
 
 
   
 
   
 
# *  Configuration for the Configuration Server Proxy container
 
# *  Configuration for the Configuration Server Proxy container
Line 1,098: Line 1,122:
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       cpu: "1000m"
 
       cpu: "1000m"
−
   # securityContext:
+
   # securityContext: {}
−
  #  runAsUser: 500
+
</source>
−
  #  runAsGroup: 500</source>
+
 
−
*Update values in the <tt>values-override-lds.yaml</tt> file (OpenShift):
+
*Update values in the <tt>values-override-lds.yaml</tt> file (GKE):
−
*:<source lang="bash">
+
*:<source lang="bash"># Default values for lds.
−
# Default values for lds.
 
 
# This is a YAML-formatted file.
 
# This is a YAML-formatted file.
 
# Declare variables to be passed into your templates.
 
# Declare variables to be passed into your templates.
Line 1,279: Line 1,302:
 
# *  Configuration for the Configuration Server Proxy container
 
# *  Configuration for the Configuration Server Proxy container
 
csproxy:
 
csproxy:
 +
  # define domain for the configuration host
 +
  params:
 +
    cfgHost: "tenant-<tenant-uuid>.voice.<domain>"
 
   resources:
 
   resources:
 
     # minimum resource requirements to start container
 
     # minimum resource requirements to start container
Line 1,335: Line 1,361:
 
'''Prepare the override file:'''
 
'''Prepare the override file:'''
  
−
*Update values in the <tt>values-override-permissions.yaml</tt> file (GKE):
+
*Update values in the <tt>values-override-permissions.yaml</tt> file (AKS):
 
*:<source lang="bash"># Default values for permissions.
 
*:<source lang="bash"># Default values for permissions.
 
# This is a YAML-formatted file.
 
# This is a YAML-formatted file.
Line 1,399: Line 1,425:
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       # what the application can effectively use before needing to be horizontally scaled out
 
       cpu: "1000m"
 
       cpu: "1000m"
−
   # securityContext:
+
   # securityContext: {}
−
  #  runAsUser: 500
 
−
  #  runAsGroup: 500
 
 
   
 
   
 
# * Common log configuration
 
# * Common log configuration
Line 1,423: Line 1,447:
 
## Specifies the security context for all Pods in the service
 
## Specifies the security context for all Pods in the service
 
##
 
##
−
podSecurityContext:
+
podSecurityContext: {}
−
  fsGroup: null
+
   
−
  runAsUser: null
 
−
  runAsGroup: 0
 
−
  runAsNonRoot: true
 
−
   
 
 
## Resource requests and limits
 
## Resource requests and limits
 
## ref: http://kubernetes.io/docs/user-guide/compute-resources/
 
## ref: http://kubernetes.io/docs/user-guide/compute-resources/
Line 1,467: Line 1,487:
 
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
 
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
 
##
 
##
−
affinity: {}</source>
+
affinity: {}
−
*Update values in the <tt>values-override-permissions.yaml</tt> file (OpenShift):
+
</source>
−
*:<source lang="bash">
+
 
−
# Default values for permissions.
+
*Update values in the <tt>values-override-permissions.yaml</tt> file (GKE):
 +
*:<source lang="bash"># Default values for permissions.
 
# This is a YAML-formatted file.
 
# This is a YAML-formatted file.
 
# Declare variables to be passed into your templates.
 
# Declare variables to be passed into your templates.
Line 1,491: Line 1,512:
 
# common configuration.
 
# common configuration.
 
config:
 
config:
−
   dbName: "<db-name>"
+
   dbName: "<db-name>"
−
   # set "true" when need @host added for username
+
   # set "true" when need @host added for username
−
   dbUserWithHost: true
+
   dbUserWithHost: true
−
   # set "true" for CSI secrets
+
   # set "true" for CSI secrets
−
   mountSecrets: false
+
   mountSecrets: false
−
   # Postgres config map name
+
   # Postgres config map name
−
   postgresConfig: "pulse-postgres-configmap"
+
   postgresConfig: "pulse-postgres-configmap"
−
   # Postgres secret name
+
   # Postgres secret name
−
   postgresSecret: "pulse-postgres-secret"
+
   postgresSecret: "pulse-postgres-secret"
−
   # Postgres secret key for user
+
   # Postgres secret key for user
−
   postgresSecretUser: "META_DB_ADMIN"
+
   postgresSecretUser: "META_DB_ADMIN"
−
   # Postgres secret key for password
+
   # Postgres secret key for password
−
   postgresSecretPassword: "META_DB_ADMINPWD"
+
   postgresSecretPassword: "META_DB_ADMINPWD"
−
   # Redis config map name
+
   # Redis config map name
−
   redisConfig: "pulse-redis-configmap"
+
   redisConfig: "pulse-redis-configmap"
−
   # Redis secret name
+
   # Redis secret name
−
   redisSecret: "pulse-redis-secret"
+
   redisSecret: "pulse-redis-secret"
−
   # Redis secret key for access key
+
   # Redis secret key for access key
−
   redisSecretKey: "REDIS01_KEY"
+
   redisSecretKey: "REDIS01_KEY"
−
   
+
   
−
   
+
   
−
# * Configuration for the Configuration Server Proxy container
+
# * Configuration for the Configuration Server Proxy container
−
csproxy:
+
csproxy:
 +
  # define domain for the configuration host
 +
  params:
 +
    cfgHost: "tenant-<tenant-uuid>.voice.<domain>"
 
   # resource limits for container
 
   # resource limits for container
 
   resources:
 
   resources:
Line 1,599: Line 1,623:
 
##
 
##
 
affinity: {}</source>
 
affinity: {}</source>
−
 
 
'''Install the permissions helm chart:'''
 
'''Install the permissions helm chart:'''
 
To install the permissions helm chart, run the following command:
 
To install the permissions helm chart, run the following command:
Line 1,617: Line 1,640:
 
|sectionHeading=Troubleshooting
 
|sectionHeading=Troubleshooting
 
|alignment=Vertical
 
|alignment=Vertical
−
|structuredtext='''Check init-tenant helm chart manifests:'''<br />To output manifest into the '''helm-template''' directory, run the following command:
+
|structuredtext='''Check init-tenant helm chart manifests:'''<br />To output the manifest into the '''helm-template''' directory, run the following command:
 
<source lang="bash">helm template --version=<chart-version> --namespace=pulse --debug --output-dir helm-template pulse-init-tenant-<tenant-sid> pulsehelmrepo/init-tenant -f values-override-init-tenant.yaml
 
<source lang="bash">helm template --version=<chart-version> --namespace=pulse --debug --output-dir helm-template pulse-init-tenant-<tenant-sid> pulsehelmrepo/init-tenant -f values-override-init-tenant.yaml
 
</source>
 
</source>
Line 1,632: Line 1,655:
 
<source lang="bash">helm template --version=<chart-version> --namespace=pulse --debug --output-dir helm-template pulse-permissions pulsehelmrepo/permissions -f values-override-permissions.yaml
 
<source lang="bash">helm template --version=<chart-version> --namespace=pulse --debug --output-dir helm-template pulse-permissions pulsehelmrepo/permissions -f values-override-permissions.yaml
 
</source>
 
</source>
−
|Status=No
 
−
}}{{Section
 
−
|sectionHeading=Configure security
 
−
|alignment=Vertical
 
−
|structuredtext====Arbitrary UIDs===
 
−
If your OpenShift deployment uses arbitrary UIDs, you must override the securityContext settings. By default, the user and group IDs are set to 500:500:500. For more information about how to update the '''podSecurityContext''' section in the YAML file for each chart, see {{Link-AnywhereElse|product=PrivateEdition|version=Current|manual=PEGuide|topic=ConfigSecurity}}.
 
 
|Status=No
 
|Status=No
 
}}
 
}}
 
|PEPageType=55cef4ff-9306-4313-8fd8-377282a38478
 
|PEPageType=55cef4ff-9306-4313-8fd8-377282a38478
 
}}
 
}}

Latest revision as of 16:01, March 29, 2023

This topic is part of the manual Genesys Pulse Private Edition Guide for version Current of Reporting.

Learn how to provision Genesys Pulse.

Prerequisites

Before performing the steps described on this page, complete the Before you begin instructions, and ensure that you have the following information:

  • Versions:
    • <image-version> = 100.0.000.0015
    • <chart-versions>= 100.0.000+0015
  • K8S namespace pulse
  • Project Name pulse
  • Postgres credentials:
    • <db-host>
    • <db-port>
    • <db-name>
    • <db-user>
    • <db-user-password>
    • <db-ssl-mode>
  • Docker credentials:
    • <docker-registry>
    • <docker-registry-secret-name>
  • Redis credentials:
    • <redis-host>
    • <redis-port>
    • <redis-password>
    • <redis-enable-ssl>
  • Tenant service variables:
    • <tenant-uuid>
    • <tenant-sid>
    • <tenant-name>
    • <tenant-dcu>
  • GAuth/GWS service variables:
    • <gauth-url-external>
    • <gauth-url-internal>
    • <gauth-client-id>
    • <gauth-client-secret>
    • <gws-url-external>
    • <gws-url-internal>
  • Storage class:
    • <pv-storage-class-rw-many>
    • <pv-storage-class-rw-once>
  • Pulse:
    • <pulse-host>

Single namespace

Single namespace deployments have a software-defined networking (SDN) with multitenant mode, where namespaces are network isolated. If you plan to deploy Pulse into the single namespace, ensure that your environment meets the following requirements for inputs:

  • Back-end services deployed into the single namespace must include the string pulse:
    • <db-host>
    • <db-name>
    • <redis-host>
  • The hostname used for Ingress must be unique, and must include the string pulse:
    • <pulse-host>
  • Internal service-to-service traffic must use the service endpoints, rather than the Ingress Controller:
    • <gauth-url-internal>
    • <gws-url-internal></source>

Tenant provisioning

Install init tenant chart

Get the init-tenant helm chart: 

helm repo update
helm search repo <pulsehelmrepo>/init-tenant

Prepare the override file:

  • Update the values-override-init-tenant.yaml file (AKS): 
    # Default values for init-tenant.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.
 
# * Images
# Replace for your values: registry and secret
image:
  tag: "<image-version>"
  pullPolicy: IfNotPresent
  registry: "<docker-registry>"
  imagePullSecrets: [name: "<docker-registry-secret-name>"]
 
configurator:
  enabled: true
  # set service domain used to access voice service
  # example for GKE VPC case: voice.svc.gke1-uswest1.gcpe002.gencpe.com
  voiceDomain: "voice.svc.<domain>"
  # set service domain used to access ixn service
  # example for GKE VPC case: ixn.svc.gke1-uswest1.gcpe002.gencpe.com
  ixnDomain: "ixn.svc.<domain>"
  # set service domain used to access pulse service
  # example for GKE VPC case: pulse.svc.gke1-uswest1.gcpe002.gencpe.com
  pulseDomain: "pulse.svc.<domain>"
  # set configration server password, used when create secrets
  cfgUser: "default"
  # set configration server user, used when create secrets
  cfgPassword: "password"
  # common log configuration
  cfgHost: "tenant-9350e2fc-a1dd-4c65-8d40-1f75a2e080dd.voice.svc.<domain>"
 
log:
  # target directory where log will be stored, leave empty for default
  logDir: ""
  # path where volume will be mounted
  volumeMountPath: /data/log
  # log volume type: none | hostpath | pvc
  volumeType: none
  # log volume hostpath, used with volumeType "hostpath"
  volumeHostPath: /mnt/log
  # log PVC parameters, used with volumeType "pvc"
  pvc:
    name: pulse-init-tenant-logs
    accessModes:
      - ReadWriteMany
    capacity: 10Gi
    class: <pv-storage-class-rw-many>
 
# * Tenant info
# Replace for your values
tenant:
  # Tenant UUID
  id: <tenant-uuid>
  # Tenant SID (like 0001)
  sid: <tenant-sid>
 
# common configuration.
config:
  dbName: "<db-name>"
  # set "true" when need @host added for username
  dbUserWithHost: true
  # set "true" for CSI secrets
  mountSecrets: false
  # Postgres config map name
  postgresConfig: "pulse-postgres-configmap"
  # Postgres secret name
  postgresSecret: "pulse-postgres-secret"
  # Postgres secret key for user
  postgresSecretUser: "META_DB_ADMIN"
  # Postgres secret key for password
  postgresSecretPassword: "META_DB_ADMINPWD"
 
## Service account settings
serviceAccount:
  # Specifies whether a service account should be created
  create: false
  # Annotations to add to the service account
  annotations: {}
  # The name of the service account to use.
  # If not set and create is true, a name is generated using the fullname template
  name: ""
 
## Add annotations to all pods
##
podAnnotations: {}
 
## Specifies the security context for all Pods in the service
##
podSecurityContext: {}
 
## Resource requests and limits
## ref: http://kubernetes.io/docs/user-guide/compute-resources/
##
resources:
  limits:
    memory: 256Mi
    cpu: 200m
  requests:
    memory: 128Mi
    cpu: 100m
 
## Priority Class
## ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/
##
priorityClassName: ""
 
## Node labels for assignment.
## ref: https://kubernetes.io/docs/user-guide/node-selection/
##
nodeSelector: {}
 
## Tolerations for assignment.
## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
 
# * Templates
templates:
  - Agent_Group_Status.gpb
  - Agent_KPIs.gpb
  - Agent_Login.gpb
  - Alert_Widget.gpb
  - Callback_Activity.gpb
  - Campaign_Activity.gpb
  - Campaign_Callback_Status.gpb
  - Campaign_Group_Activity.gpb
  - Campaign_Group_Status.gpb
  - Chat_Agent_Activity.gpb
  - Chat_Queue_Activity.gpb
  - Chat_Service_Level_Performance.gpb
  - Chat_Waiting_Statistics.gpb
  - Email_Agent_Activity.gpb
  - Email_Queue_Activity.gpb
  - Facebook_Media_Activity.gpb
  - IFRAME.gpb
  - IWD_Agent_Activity.gpb
  - IWD_Queue_Activity.gpb
  - Queue_KPIs.gpb
  - Queue_Overflow_Reason.gpb
  - Static_Text.gpb
  - Twitter_Media_Activity.gpb
  - eServices_Agent_Activity.gpb
  - eServices_Queue_KPIs.gpb
  • Update the values-override-init-tenant.yaml file (GKE):
    Important
    Enable configurator only for configurations in GKE with VPC scoped DNS.
  • # Default values for init-tenant.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.
 
# * Images
# Replace for your values: registry and secret
image:
  tag: "<image-version>"
  pullPolicy: IfNotPresent
  registry: "<docker-registry>"
  imagePullSecrets: [name: "<docker-registry-secret-name>"]
 
configurator:
  enabled: true
  # set service domain used to access voice service
  # example for GKE VPC case: voice.svc.gke1-uswest1.gcpe002.gencpe.com
  voiceDomain: "voice.svc.<domain>"
  # set service domain used to access ixn service
  # example for GKE VPC case: ixn.svc.gke1-uswest1.gcpe002.gencpe.com
  ixnDomain: "ixn.svc.<domain>"
  # set service domain used to access pulse service
  # example for GKE VPC case: pulse.svc.gke1-uswest1.gcpe002.gencpe.com
  pulseDomain: "pulse.svc.<domain>"
  # set configration server password, used when create secrets
  cfgUser: "default"
  # set configration server user, used when create secrets
  cfgPassword: "password"
  # common log configuration
  cfgHost: "tenant-<tenant-uuid>.voice.svc.<domain>"
 
log:
  # target directory where log will be stored, leave empty for default
  logDir: ""
  # path where volume will be mounted
  volumeMountPath: /data/log
  # log volume type: none | hostpath | pvc
  volumeType: none
  # log volume hostpath, used with volumeType "hostpath"
  volumeHostPath: /mnt/log
  # log PVC parameters, used with volumeType "pvc"
  pvc:
    name: pulse-init-tenant-logs
    accessModes:
      - ReadWriteMany
    capacity: 10Gi
    class: nfs-client
 
# * Tenant info
# Replace for your values
tenant:
  # Tenant UUID
  id: <tenant-uuid>
  # Tenant SID (like 0001)
  sid: <tenant-sid>
 
# common configuration.
config:
  dbName: "<db-name>"
  # set "true" when need @host added for username
  dbUserWithHost: true
  # set "true" for CSI secrets
  mountSecrets: false
  # Postgres config map name
  postgresConfig: "pulse-postgres-configmap"
  # Postgres secret name
  postgresSecret: "pulse-postgres-secret"
  # Postgres secret key for user
  postgresSecretUser: "META_DB_ADMIN"
  # Postgres secret key for password
  postgresSecretPassword: "META_DB_ADMINPWD"
 
## Service account settings
serviceAccount:
  # Specifies whether a service account should be created
  create: false
  # Annotations to add to the service account
  annotations: {}
  # The name of the service account to use.
  # If not set and create is true, a name is generated using the fullname template
  name: ""
 
## Add annotations to all pods
##
podAnnotations: {}
 
## Specifies the security context for all Pods in the service
##
podSecurityContext:
   fsGroup: null
   runAsUser: null
   runAsGroup: 0
   runAsNonRoot: true
 
## Resource requests and limits
## ref: http://kubernetes.io/docs/user-guide/compute-resources/
##
resources:
  limits:
    memory: 256Mi
    cpu: 200m
  requests:
    memory: 128Mi
    cpu: 100m
 
## Priority Class
## ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/
##
priorityClassName: ""
 
## Node labels for assignment.
## ref: https://kubernetes.io/docs/user-guide/node-selection/
##
nodeSelector: {}
 
## Tolerations for assignment.
## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
 
# * Templates
templates:
  - Agent_Group_Status.gpb
  - Agent_KPIs.gpb
  - Agent_Login.gpb
  - Alert_Widget.gpb
  - Callback_Activity.gpb
  - Campaign_Activity.gpb
  - Campaign_Callback_Status.gpb
  - Campaign_Group_Activity.gpb
  - Campaign_Group_Status.gpb
  - Chat_Agent_Activity.gpb
  - Chat_Queue_Activity.gpb
  - Chat_Service_Level_Performance.gpb
  - Chat_Waiting_Statistics.gpb
  - Email_Agent_Activity.gpb
  - Email_Queue_Activity.gpb
  - Facebook_Media_Activity.gpb
  - IFRAME.gpb
  - IWD_Agent_Activity.gpb
  - IWD_Queue_Activity.gpb
  - Queue_KPIs.gpb
  - Queue_Overflow_Reason.gpb
  - Static_Text.gpb
  - Twitter_Media_Activity.gpb
  - eServices_Agent_Activity.gpb
  - eServices_Queue_KPIs.gpb

Install the init-tenant helm chart:
To install the init-tenant helm chart, run the following command: 

helm upgrade --install "pulse-init-tenant-<tenant-sid>" pulsehelmrepo/init-tenant --wait --wait-for-jobs --version="<chart-version>"--namespace=pulse -f values-override-init-tenant.yaml

If installation is successful, the exit code 0 appears.

Validate the init-tenant helm chart:
To validate the init-tenant helm chart, run the following command: 

kubectl get pods -n="pulse" -l "app.kubernetes.io/name=init-tenant,app.kubernetes.io/instance=pulse-init-tenant-<tenant-sid>"

If the deployment was successful, the pulse-init-tenant job is listed as Completed/. For example: 

NAME                                     READY   STATUS      RESTARTS   AGE
pulse-init-tenant-100-job-qszgl          0/1     Completed   0          2d20h

Install dcu helm chart

Get the dcu helm chart: 

helm repo update
helm search repo <pulsehelmrepo>/dcu

Prepare the override file:

  • Update the values-override-dcu.yaml file (AKS): 
    # Default values for dcu.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.
 
replicaCount: "<tenant-dcu>"
 
# * Tenant info
# tenant identification, or empty for shared deployment
tenant:
  # Tenant UUID
  id: "<tenant-uuid>"
  # Tenant SID (like 0001)
  sid: "<tenant-sid>"
 
# * Common log configuration
log:
  # target directory where log will be stored, leave empty for default
  logDir: ""
  # path where volume will be mounted
  volumeMountPath: /data/log
  # log volume type: none | hostpath | pvc
  volumeType: pvc
  # log volume hostpath, used with volumeType "hostpath"
  volumeHostPath: /mnt/log
  # log PVC parameters, used with volumeType "pvc"
  pvc:
    name: pulse-dcu-logs
    accessModes:
      - ReadWriteMany
    capacity: 10Gi
    class: <pv-storage-class-rw-many>
 
# * Config info
# Set your values.
config:
  dbName: "<db-name>"
  # set "true" when need @host added for username
  dbUserWithHost: true
  mountSecrets: false
  postgresConfig: "pulse-postgres-configmap"
  # Postgres secret name
  postgresSecret: "pulse-postgres-secret"
  # Postgres secret key for user
  postgresSecretUser: "META_DB_ADMIN"
  # Postgres secret key for password
  postgresSecretPassword: "META_DB_ADMINPWD"
  redisConfig: "pulse-redis-configmap"
  # Redis secret name
  redisSecret: "pulse-redis-secret"
  # Redis secret key for access key
  redisSecretKey: "REDIS01_KEY"
 
# * Image
# container image common settings
image:
  tag: "<image-version>"
  pullPolicy: IfNotPresent
  registry: "<docker-registry>"
  imagePullSecrets: [name: "<docker-registry-secret-name>"]
 
## Service account settings
serviceAccount:
  # Specifies whether a service account should be created
  create: false
  # Annotations to add to the service account
  annotations: {}
  # The name of the service account to use.
  # If not set and create is true, a name is generated using the fullname template
  name: ""
 
## Add annotations to all pods
##
podAnnotations: {}
 
## Specifies the security context for all Pods in the service
##
podSecurityContext: {}
 
## Add labels to all pods
##
podLabels: {}
 
## HPA Settings
## Not supported in this release!
hpa:
  enabled: false
 
## Priority Class
## ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/
##
priorityClassName: ""
 
## Node labels for assignment.
## ref: https://kubernetes.io/docs/user-guide/node-selection/
##
nodeSelector: {}
 
## Tolerations for assignment.
## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
 
## Pod Disruption Budget Settings
podDisruptionBudget:
  enabled: false
 
## Affinity for assignment.
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
##
affinity: {}
 
# * Monitoring settings
monitoring:
  # enable the Prometheus metrics endpoint
  enabled: false
  # enable golden signals metrics (not supported for PE)
  goldenSignals:
    enabled: false
  # port number of the Prometheus metrics endpoint
  port: 9091
  # HTTP path to scrape for metrics
  path: /metrics
  # additional annotations required for monitoring PODs
  # you can reference values of other variables as {{.Values.variable.full.name}}
  podAnnotations: {}
    # prometheus.io/scrape: "true"
    # prometheus.io/port: "{{.Values.monitoring.port}}"
    # prometheus.io/path: "/metrics"
  podMonitor:
    # enables PodMonitor creation for the POD
    enabled: true
    # interval at which metrics should be scraped
    scrapeInterval: 30s
    # timeout after which the scrape is ended
    scrapeTimeout:
    # namespace of the PodMonitor, defaults to the namespace of the POD
    namespace:
    additionalLabels: {}
  alerts:
    # enables alert rules
    enabled: true
    # alert condition duration
    duration: 5m
    # namespace of the alert rules, defaults to the namespace of the POD
    namespace:
    additionalLabels: {}
   
 
##########################################################################
 
# * Configuration for the Collector container
collector:
  # resource limits for container
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "300Mi"
      # minimal CPU to reserve
      cpu: "200m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "4Gi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "8000m"
  # securityContext: {}
 
# * Configuration for the StatServer container
statserver:
  # resource limits for container
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "300Mi"
      # minimal CPU to reserve
      cpu: "100m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "4Gi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "4000m"
  # securityContext: {}
 
# * Configuration for the monitor sidecar container
monitorSidecar:
  # resource limits for container
  resources:
    # disabled: true
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "30Mi"
      # minimal CPU to reserve
      cpu: "2m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "70Mi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "10m"
  # securityContext: {}
 
##########################################################################
 
# * Configuration for the Configuration Server Proxy container
csproxy:
  # define domain for the configuration host
  params:
    cfgHost: "tenant-<tenant-uuid>.voice.<domain>"
  # resource limits for container
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "200Mi"
      # minimal CPU to reserve
      cpu: "50m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "2Gi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "1000m"
  # securityContext: {}
 
# volumeClaims contains persistent volume claims for services
# All available storage classes can be found here:
# https://github.com/genesysengage/tfm-azure-core-aks/blob/master/k8s-module/storage.tf
volumeClaims:
  # statserverBackup is storage for statserver backup data
  statserverBackup:
    name: statserver-backup
    accessModes:
      - ReadWriteOnce
    # capacity is storage capacity
    capacity: "1Gi"
    # class is storage class. Must be set explicitly.
    class: <pv-storage-class-rw-once>
  • Update the values-override-dcu.yaml file (GKE): 
    # Default values for dcu.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.
 
replicaCount: "<tenant-dcu>"
 
# * Tenant info
# tenant identification, or empty for shared deployment
tenant:
  # Tenant UUID
  id: "<tenant-uuid>"
  # Tenant SID (like 0001)
  sid: "<tenant-sid>"
 
# * Common log configuration
log:
  # target directory where log will be stored, leave empty for default
  logDir: ""
  # path where volume will be mounted
  volumeMountPath: /data/log
  # log volume type: none | hostpath | pvc
  volumeType: pvc
  # log volume hostpath, used with volumeType "hostpath"
  volumeHostPath: /mnt/log
  # log PVC parameters, used with volumeType "pvc"
  pvc:
    name: pulse-dcu-logs
    accessModes:
      - ReadWriteMany
    capacity: 10Gi
    class: <pv-storage-class-rw-many>
 
# * Config info
# Set your values.
config:
  dbName: "<db-name>"
  # set "true" when need @host added for username
  dbUserWithHost: true
  mountSecrets: false
  postgresConfig: "pulse-postgres-configmap"
  # Postgres secret name
  postgresSecret: "pulse-postgres-secret"
  # Postgres secret key for user
  postgresSecretUser: "META_DB_ADMIN"
  # Postgres secret key for password
  postgresSecretPassword: "META_DB_ADMINPWD"
  redisConfig: "pulse-redis-configmap"
  # Redis secret name
  redisSecret: "pulse-redis-secret"
  # Redis secret key for access key
  redisSecretKey: "REDIS01_KEY"
 
# * Image
# container image common settings
image:
  tag: "<image-version>"
  pullPolicy: IfNotPresent
  registry: "<docker-registry>"
  imagePullSecrets: [name: "<docker-registry-secret-name>"]
 
## Service account settings
serviceAccount:
  # Specifies whether a service account should be created
  create: false
  # Annotations to add to the service account
  annotations: {}
  # The name of the service account to use.
  # If not set and create is true, a name is generated using the fullname template
  name: ""
 
## Add annotations to all pods
##
podAnnotations: {}
 
## Specifies the security context for all Pods in the service
##
podSecurityContext:
  runAsNonRoot: true
  runAsUser: 500
  runAsGroup: 500
  fsGroup: 0
 
## Add labels to all pods
##
podLabels: {}
 
## HPA Settings
## Not supported in this release!
hpa:
  enabled: false
 
## Priority Class
## ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/
##
priorityClassName: ""
 
## Node labels for assignment.
## ref: https://kubernetes.io/docs/user-guide/node-selection/
##
nodeSelector: {}
 
## Tolerations for assignment.
## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
 
## Pod Disruption Budget Settings
podDisruptionBudget:
  enabled: false
 
## Affinity for assignment.
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
##
affinity: {}
 
# * Monitoring settings
monitoring:
  # enable the Prometheus metrics endpoint
  enabled: false
  # enable golden signals metrics (not supported for PE)
  goldenSignals:
    enabled: false
  # port number of the Prometheus metrics endpoint
  port: 9091
  # HTTP path to scrape for metrics
  path: /metrics
  # additional annotations required for monitoring PODs
  # you can reference values of other variables as {{.Values.variable.full.name}}
  podAnnotations: {}
    # prometheus.io/scrape: "true"
    # prometheus.io/port: "{{.Values.monitoring.port}}"
    # prometheus.io/path: "/metrics"
  podMonitor:
    # enables PodMonitor creation for the POD
    enabled: true
    # interval at which metrics should be scraped
    scrapeInterval: 30s
    # timeout after which the scrape is ended
    scrapeTimeout:
    # namespace of the PodMonitor, defaults to the namespace of the POD
    namespace:
    additionalLabels: {}
  alerts:
    # enables alert rules
    enabled: true
    # alert condition duration
    duration: 5m
    # namespace of the alert rules, defaults to the namespace of the POD
    namespace:
    additionalLabels: {}
   
 
##########################################################################
 
# * Configuration for the Collector container
collector:
  # resource limits for container
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "300Mi"
      # minimal CPU to reserve
      cpu: "200m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "4Gi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "8000m"
  # securityContext:
  #   runAsUser: 500
  #   runAsGroup: 500
 
# * Configuration for the StatServer container
statserver:
  # resource limits for container
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "300Mi"
      # minimal CPU to reserve
      cpu: "100m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "4Gi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "4000m"
  # securityContext:
  #   runAsUser: 500
  #   runAsGroup: 500
 
# * Configuration for the monitor sidecar container
monitorSidecar:
  # resource limits for container
  resources:
    # disabled: true
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "30Mi"
      # minimal CPU to reserve
      cpu: "2m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "70Mi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "10m"
  # securityContext:
  #   runAsUser: 500
  #   runAsGroup: 500
 
##########################################################################
 
# * Configuration for the Configuration Server Proxy container
csproxy:
  # define domain for the configuration host
  params:
    cfgHost: "tenant-<tenant-uuid>.voice.<domain>"
  # resource limits for container
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "200Mi"
      # minimal CPU to reserve
      cpu: "50m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "2Gi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "1000m"
  # securityContext:
  #   runAsUser: 500
  #   runAsGroup: 500
 
# volumeClaims contains persistent volume claims for services
# All available storage classes can be found here:
# https://github.com/genesysengage/tfm-azure-core-aks/blob/master/k8s-module/storage.tf
volumeClaims:
  # statserverBackup is storage for statserver backup data
  statserverBackup:
    name: statserver-backup
    accessModes:
      - ReadWriteOnce
    # capacity is storage capacity
    capacity: "1Gi"
    # class is storage class. Must be set explicitly.
    class: <pv-storage-class-rw-once>

Install the dcu helm chart
To install the dcu helm chart, run the following command: 

helm upgrade --install "pulse-dcu-<tenant-sid>"  pulsehelmrepo/dcu --wait --reuse-values --version=<chart-version> --namespace=pulse -f values-override-dcu.yaml

Validate the dcu helm chart
To validate the dcu helm chart, run the following command: 

kubectl get pods -n=pulse -l "app.kubernetes.io/name=dcu,app.kubernetes.io/instance=pulse-dcu-<tenant-sid>"

Check the output to ensure that all pulse-dcu pods are running, for example: 

NAME              READY   STATUS    RESTARTS   AGE
pulse-dcu-100-0   3/3     Running   0          5m23s
pulse-dcu-100-1   3/3     Running   0          4m47s

Install lds helm chart

Get the lds helm chart: 

helm repo update
helm search repo  <pulsehelmrepo>/lds

Prepare the override file:

  • Update values in the values-override-lds.yaml file (AKS): 
    # Default values for lds.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.
 
replicaCount: 2
 
# * Tenant info
# tenant identification, or empty for shared deployment
tenant:
  # Tenant UUID
  id: "<tenant-uuid>"
  # Tenant SID (like 0001)
  sid: "<tenant-sid>"
 
# * Common log configuration
log:
  # target directory where log will be stored, leave empty for default
  logDir: ""
  # path where volume will be mounted
  volumeMountPath: /data/log
  # log volume type: none | hostpath | pvc
  volumeType: pvc
  # log volume hostpath, used with volumeType "hostpath"
  volumeHostPath: /mnt/log
  # log PVC parameters, used with volumeType "pvc"
  pvc:
    name: pulse-lds-logs
    accessModes:
      - ReadWriteMany
    capacity: 10Gi
    class: <pv-storage-class-rw-many>
 
# * Container image common settings
image:
  tag: "<image-version>"
  pullPolicy: IfNotPresent
  registry: "<docker-registry>"
  imagePullSecrets: [name: "<docker-registry-secret-name>"]
 
## Service account settings
serviceAccount:
  # Specifies whether a service account should be created
  create: false
  # Annotations to add to the service account
  annotations: {}
  # The name of the service account to use.
  # If not set and create is true, a name is generated using the fullname template
  name: ""
 
## Add annotations to all pods
##
podAnnotations: {}
 
## Specifies the security context for all Pods in the service
##
podSecurityContext: {}
 
## Add labels to all pods
##
podLabels: {}
 
## HPA Settings
## Not supported in this release!
hpa:
  enabled: false
 
## Priority Class
## ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/
##
priorityClassName: ""
 
## Node labels for assignment.
## ref: https://kubernetes.io/docs/user-guide/node-selection/
##
nodeSelector: {}
 
## Tolerations for assignment.
## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
 
## Pod Disruption Budget Settings
podDisruptionBudget:
  enabled: false
 
## Affinity for assignment.
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
##
affinity: {}
 
# * Monitoring settings
monitoring:
  # enable the Prometheus metrics endpoint
  enabled: false
  # enable golden signals metrics (not supported for PE)
  goldenSignals:
    enabled: false
  # port number of the Prometheus metrics endpoint
  port: 9091
  # HTTP path to scrape for metrics
  path: /metrics
  # additional annotations required for monitoring PODs
  # you can reference values of other variables as {{.Values.variable.full.name}}
  podAnnotations: {}
    # prometheus.io/scrape: "true"
    # prometheus.io/port: "{{.Values.monitoring.port}}"
    # prometheus.io/path: "/metrics"
  podMonitor:
    # enables PodMonitor creation for the POD
    enabled: true
    # interval at which metrics should be scraped
    scrapeInterval: 30s
    # timeout after which the scrape is ended
    scrapeTimeout:
    # namespace of the PodMonitor, defaults to the namespace of the POD
    namespace:
    additionalLabels: {}
  alerts:
    # enables alert rules
    enabled: true
    # alert condition duration
    duration: 5m
    # namespace of the alert rules, defaults to the namespace of the POD
    namespace:
    additionalLabels: {}
 
# * Configuration for the LDS container
lds:
  # resource limits for container
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "50Mi"
      # minimal CPU to reserve
      cpu: "50m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "4Gi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "4000m"
  # securityContext: {}
 
# * Configuration for the monitor sidecar container
monitorSidecar:
  # resource limits for container
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "30Mi"
      # minimal CPU to reserve
      cpu: "2m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "70Mi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "10m"
  # securityContext: {}
 
# *  Configuration for the Configuration Server Proxy container
csproxy:
  # define domain for the configuration host
  params:
    cfgHost: "tenant-<tenant-uuid>.voice.<domain>"
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "200Mi"
      # minimal CPU to reserve
      cpu: "50m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "2Gi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "1000m"
  # securityContext: {}
  • Update values in the values-override-lds.yaml file (GKE): 
    # Default values for lds.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.
 
replicaCount: 2
 
# * Tenant info
# tenant identification, or empty for shared deployment
tenant:
  # Tenant UUID
  id: "<tenant-uuid>"
  # Tenant SID (like 0001)
  sid: "<tenant-sid>"
 
# * Common log configuration
log:
  # target directory where log will be stored, leave empty for default
  logDir: ""
  # path where volume will be mounted
  volumeMountPath: /data/log
  # log volume type: none | hostpath | pvc
  volumeType: pvc
  # log volume hostpath, used with volumeType "hostpath"
  volumeHostPath: /mnt/log
  # log PVC parameters, used with volumeType "pvc"
  pvc:
    name: pulse-lds-logs
    accessModes:
      - ReadWriteMany
    capacity: 10Gi
    class: <pv-storage-class-rw-many>
 
# * Container image common settings
image:
  tag: "<image-version>"
  pullPolicy: IfNotPresent
  registry: "<docker-registry>"
  imagePullSecrets: [name: "<docker-registry-secret-name>"]
 
## Service account settings
serviceAccount:
  # Specifies whether a service account should be created
  create: false
  # Annotations to add to the service account
  annotations: {}
  # The name of the service account to use.
  # If not set and create is true, a name is generated using the fullname template
  name: ""
 
## Add annotations to all pods
##
podAnnotations: {}
 
## Specifies the security context for all Pods in the service
##
podSecurityContext:
  runAsNonRoot: true
  runAsUser: 500
  runAsGroup: 500
  fsGroup: 0
 
## Add labels to all pods
##
podLabels: {}
 
## HPA Settings
## Not supported in this release!
hpa:
  enabled: false
 
## Priority Class
## ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/
##
priorityClassName: ""
 
## Node labels for assignment.
## ref: https://kubernetes.io/docs/user-guide/node-selection/
##
nodeSelector: {}
 
## Tolerations for assignment.
## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
 
## Pod Disruption Budget Settings
podDisruptionBudget:
  enabled: false
 
## Affinity for assignment.
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
##
affinity: {}
 
# * Monitoring settings
monitoring:
  # enable the Prometheus metrics endpoint
  enabled: false
  # enable golden signals metrics (not supported for PE)
  goldenSignals:
    enabled: false
  # port number of the Prometheus metrics endpoint
  port: 9091
  # HTTP path to scrape for metrics
  path: /metrics
  # additional annotations required for monitoring PODs
  # you can reference values of other variables as {{.Values.variable.full.name}}
  podAnnotations: {}
    # prometheus.io/scrape: "true"
    # prometheus.io/port: "{{.Values.monitoring.port}}"
    # prometheus.io/path: "/metrics"
  podMonitor:
    # enables PodMonitor creation for the POD
    enabled: true
    # interval at which metrics should be scraped
    scrapeInterval: 30s
    # timeout after which the scrape is ended
    scrapeTimeout:
    # namespace of the PodMonitor, defaults to the namespace of the POD
    namespace:
    additionalLabels: {}
  alerts:
    # enables alert rules
    enabled: true
    # alert condition duration
    duration: 5m
    # namespace of the alert rules, defaults to the namespace of the POD
    namespace:
    additionalLabels: {}
 
# * Configuration for the LDS container
lds:
  # resource limits for container
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "50Mi"
      # minimal CPU to reserve
      cpu: "50m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "4Gi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "4000m"
  # securityContext:
  #   runAsUser: 500
  #   runAsGroup: 500
 
# * Configuration for the monitor sidecar container
monitorSidecar:
  # resource limits for container
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "30Mi"
      # minimal CPU to reserve
      cpu: "2m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "70Mi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "10m"
  # securityContext:
  #   runAsUser: 500
  #   runAsGroup: 500
 
# *  Configuration for the Configuration Server Proxy container
csproxy:
  # define domain for the configuration host
  params:
    cfgHost: "tenant-<tenant-uuid>.voice.<domain>"
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "200Mi"
      # minimal CPU to reserve
      cpu: "50m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "2Gi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "1000m"
  # securityContext:
  #   runAsUser: 500
  #   runAsGroup: 500

Update values in the values-override-lds-vq.yaml file: 

# Default values for lds.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.
 
lds:
  params:
    cfgApp: "pulse-lds-vq-$((K8S_POD_INDEX % 2))"
 
log:
  pvc:
    name: pulse-lds-vq-logs

Install the lds helm chart:
To install the lds helm chart, run the following command: 

helm upgrade --install "pulse-lds-<tenant-sid>"    pulsehelmrepo/lds --wait --version=<chart-version> --namespace=pulse -f values-override-lds.yaml
helm upgrade --install "pulse-lds-vq-<tenant-sid>" pulsehelmrepo/lds --wait --version=<chart-version> --namespace=pulse -f values-override-lds.yaml -f values-override-lds-vq.yaml

If the installation is successful, the exit code 0 appears.

Validate the lds helm chart:
To validate the lds helm chart, run the following command: 

kubectl get pods -n=pulse -l "app.kubernetes.io/name=lds,app.kubernetes.io/instance=pulse-lds-<tenant-sid>"

Verify that the command reports all pulse-lds-vq pods as Running, for example: 

NAME              READY   STATUS    RESTARTS   AGE
pulse-lds-100-0   3/3     Running   0          2d20h
pulse-lds-100-1   3/3     Running   0          2d20h

Install permissions helm chart

Get the permissions helm chart 

helm repo update
helm search repo <pulsehelmrepo>/permissions

Prepare the override file:

  • Update values in the values-override-permissions.yaml file (AKS): 
    # Default values for permissions.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.
 
# * Image configuration
image:
  tag: "<image-version>"
  pullPolicy: IfNotPresent
  registry: "<docker-registry>"
  imagePullSecrets: [name: "<docker-registry-secret-name>"]
 
# * Tenant info
# tenant identification, or empty for shared deployment
tenant:
  # Tenant UUID
  id: "<tenant-uuid>"
  # Tenant SID (like 0001)
  sid: "<tenant-sid>"
 
# common configuration.
config:
  dbName: "<db-name>"
  # set "true" when need @host added for username
  dbUserWithHost: true
  # set "true" for CSI secrets
  mountSecrets: false
  # Postgres config map name
  postgresConfig: "pulse-postgres-configmap"
  # Postgres secret name
  postgresSecret: "pulse-postgres-secret"
  # Postgres secret key for user
  postgresSecretUser: "META_DB_ADMIN"
  # Postgres secret key for password
  postgresSecretPassword: "META_DB_ADMINPWD"
  # Redis config map name
  redisConfig: "pulse-redis-configmap"
  # Redis secret name
  redisSecret: "pulse-redis-secret"
  # Redis secret key for access key
  redisSecretKey: "REDIS01_KEY"
 
 
# * Configuration for the Configuration Server Proxy container
csproxy:
  # define domain for the configuration host
  params:
    cfgHost: "tenant-<tenant-uuid>.voice.<domain>"
  # resource limits for container
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "200Mi"
      # minimal CPU to reserve
      cpu: "50m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "2Gi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "1000m"
  # securityContext: {}
 
# * Common log configuration
log:
  # target directory where log will be stored, leave empty for default
  logDir: ""
  # path where volume will be mounted
  volumeMountPath: /data/log
  # log volume type: none | hostpath | pvc
  volumeType: pvc
  # log volume hostpath, used with volumeType "hostpath"
  volumeHostPath: /mnt/log
  # log PVC parameters, used with volumeType "pvc"
  pvc:
    name: pulse-permissions-logs
    accessModes:
      - ReadWriteMany
    capacity: 10Gi
    class: <pv-storage-class-rw-many>
 
## Specifies the security context for all Pods in the service
##
podSecurityContext: {}
 
## Resource requests and limits
## ref: http://kubernetes.io/docs/user-guide/compute-resources/
##
resources:
  limits:
    memory: "1Gi"
    cpu: "500m"
  requests:
    memory: "400Mi"
    cpu: "50m"
 
## HPA Settings
## Not supported in this release!
hpa:
  enabled: false
 
## Priority Class
## ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/
##
priorityClassName: ""
 
## Node labels for assignment.
## ref: https://kubernetes.io/docs/user-guide/node-selection/
##
nodeSelector: {}
 
## Tolerations for assignment.
## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
 
## Pod Disruption Budget Settings
podDisruptionBudget:
  enabled: false
 
## Affinity for assignment.
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
##
affinity: {}
  • Update values in the values-override-permissions.yaml file (GKE): 
    # Default values for permissions.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.
 
# * Image configuration
image:
  tag: "<image-version>"
  pullPolicy: IfNotPresent
  registry: "<docker-registry>"
  imagePullSecrets: [name: "<docker-registry-secret-name>"]
 
# * Tenant info
# tenant identification, or empty for shared deployment
tenant:
  # Tenant UUID
  id: "<tenant-uuid>"
  # Tenant SID (like 0001)
  sid: "<tenant-sid>"
 
# common configuration.
config:
  dbName: "<db-name>"
  # set "true" when need @host added for username
  dbUserWithHost: true
  # set "true" for CSI secrets
  mountSecrets: false
  # Postgres config map name
  postgresConfig: "pulse-postgres-configmap"
  # Postgres secret name
  postgresSecret: "pulse-postgres-secret"
  # Postgres secret key for user
  postgresSecretUser: "META_DB_ADMIN"
  # Postgres secret key for password
  postgresSecretPassword: "META_DB_ADMINPWD"
  # Redis config map name
  redisConfig: "pulse-redis-configmap"
  # Redis secret name
  redisSecret: "pulse-redis-secret"
  # Redis secret key for access key
  redisSecretKey: "REDIS01_KEY"
 
 
# * Configuration for the Configuration Server Proxy container
csproxy:
  # define domain for the configuration host
  params:
    cfgHost: "tenant-<tenant-uuid>.voice.<domain>"
  # resource limits for container
  resources:
    # minimum resource requirements to start container
    requests:
      # minimal amount of memory required to start a container
      memory: "200Mi"
      # minimal CPU to reserve
      cpu: "50m"
    # resource limits for containers
    limits:
      # maximum amount of memory a container can use before being evicted
      # by the OOM Killer
      memory: "2Gi"
      # maximum amount of CPU resources that can be used and should be tuned to reflect
      # what the application can effectively use before needing to be horizontally scaled out
      cpu: "1000m"
  # securityContext:
  #   runAsUser: 500
  #   runAsGroup: 500
 
# * Common log configuration
log:
  # target directory where log will be stored, leave empty for default
  logDir: ""
  # path where volume will be mounted
  volumeMountPath: /data/log
  # log volume type: none | hostpath | pvc
  volumeType: pvc
  # log volume hostpath, used with volumeType "hostpath"
  volumeHostPath: /mnt/log
  # log PVC parameters, used with volumeType "pvc"
  pvc:
    name: pulse-permissions-logs
    accessModes:
      - ReadWriteMany
    capacity: 10Gi
    class: <pv-storage-class-rw-many>
 
## Specifies the security context for all Pods in the service
##
podSecurityContext:
   fsGroup: null
   runAsUser: null
   runAsGroup: 0
   runAsNonRoot: true
 
## Resource requests and limits
## ref: http://kubernetes.io/docs/user-guide/compute-resources/
##
resources:
  limits:
    memory: "1Gi"
    cpu: "500m"
  requests:
    memory: "400Mi"
    cpu: "50m"
 
## HPA Settings
## Not supported in this release!
hpa:
  enabled: false
 
## Priority Class
## ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/
##
priorityClassName: ""
 
## Node labels for assignment.
## ref: https://kubernetes.io/docs/user-guide/node-selection/
##
nodeSelector: {}
 
## Tolerations for assignment.
## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
 
## Pod Disruption Budget Settings
podDisruptionBudget:
  enabled: false
 
## Affinity for assignment.
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
##
affinity: {}

Install the permissions helm chart: To install the permissions helm chart, run the following command: 

helm upgrade --install "pulse-permissions-<tenant-sid>" pulsehelmrepo/permissions --wait --version="<chart-version>" --namespace=pulse -f values-override-permissions.yaml

If installation is successful, the exit code 0 appears.

Validate the permissions helm chart:
To validate the permissions helm chart, run the following command: 

kubectl get pods -n=pulse -l "app.kubernetes.io/name=permissions,app.kubernetes.io/instance=pulse-permissions-<tenant-sid>"

Verify that the command report all pulse-permissions pods as Running, for example: 

NAME                                    READY   STATUS    RESTARTS   AGE
pulse-permissions-100-c5ff8bb7d-jl7d7   2/2     Running   2          2d20h

Troubleshooting

Check init-tenant helm chart manifests:
To output the manifest into the helm-template directory, run the following command: 

helm template --version=<chart-version> --namespace=pulse --debug --output-dir helm-template pulse-init-tenant-<tenant-sid> pulsehelmrepo/init-tenant -f values-override-init-tenant.yaml

Check dcu helm chart manifests:
To output the dcu Helm chart manifest into the helm-template directory, run the following command: 

helm template --version=<chart-version> --namespace=pulse --debug --output-dir helm-template pulse-dcu-<tenant-sid> pulsehelmrepo/dcu -f values-override-dcu.yaml

Check lds helm chart manifests:
To output the lds chart manifest into the helm-template directory, run the following command: 

helm template --version=<chart-version> --namespace=pulse --debug --output-dir helm-template pulse-lds-<tenant-sid> pulsehelmrepo/lds -f values-override-lds.yaml

Check permissions Helm chart manifests:
To output the Helm chart manifest into the helm-template directory, run the following command: 

helm template --version=<chart-version> --namespace=pulse --debug --output-dir helm-template pulse-permissions pulsehelmrepo/permissions -f values-override-permissions.yaml
Retrieved from "https://all.docs.genesys.com/PEC-REP/Current/PulsePEGuide/Provision (2025-07-16 22:22:28)"
Comments or questions about this documentation? Contact us for support!