View source for GVP/Current/GVPPEGuide/GVP MCP Metrics

{{ArticlePEServiceMetrics
|IncludedServiceId=b83a47fb-1f8f-4675-acbf-93de4c2f631b
|CRD=Service/Pod Monitoring Settings
|Port=9116,

8080,

8200
|Endpoint=Metrics endpoints:
<source>
curl -v "http://<MCP_POD_IP>:9116/snmp?target=127.0.0.1%3A1161&module=if_mib"

curl -v "http://<MCP_POD_IP>:8080/metrics

curl -v "http://<MCP_POD_IP>:8200/log
</source>

Service/Pod Monitoring Settings:

<source>
values.yaml
------------
prometheus:
  enabled: true
  mcp:
      port: 9116   
  rup:
     port: 8080
  log:
     port: 8200
  podMonitor:
    enabled: true
</source>

Grafana dashboard settings:

<source>
values.yaml
------------
grafana:
  enabled: true
</source>
|MetricsDefined=Yes
|PEMetric={{PEMetric
|Metric=mcpSipCurrentInboundSessions
|Type=Gauge
|Unit=Unsigned32
|MetricDescription=MCP Current Inbound Sessions
|SampleValue=3
|UsedFor=Traffic
}}{{PEMetric
|Metric=mcpSipPeakInboundSessions
|Type=Gauge
|Unit=Unsigned32
|MetricDescription=MCP Peak Inbound Sessions
|SampleValue=100
|UsedFor=Traffic
}}{{PEMetric
|Metric=mcpSipTotalInboundSessions
|Type=Gauge
|Unit=Unsigned32
|MetricDescription=MCP Total Inbound Sessions
|SampleValue=9000
|UsedFor=Traffic
}}{{PEMetric
|Metric=mcpStatus
|Type=Gauge
|Unit=0/1
|MetricDescription=MCP is RUNNING or not
|SampleValue=1
|UsedFor=Information
}}{{PEMetric
|Metric=gvp_mcp_log_parser_eror_total
|Type=Gauge
|Unit=Unsigned32
|MetricDescription=Used for alerting for various errors based on MCP log parsing. Errors are indexed by LogID's.
|SampleValue=35929
|UsedFor=Errors
}}
|AlertsDefined=Yes
|PEAlert={{PEAlert
|Alert=ContainerCPUreached70percentForMCP
|Severity=HIGH
|AlertDescription=The trigger will flag an alarm when the MCP container CPU utilization goes beyond 70% for 5 mins
|BasedOn=container_cpu_usage_seconds_total,  container_spec_cpu_quota,  container_spec_cpu_period
|Threshold=15mins
}}{{PEAlert
|Alert=ContainerMemoryUseOver90PercentForMCP
|Severity=HIGH
|AlertDescription=The trigger will flag an alarm when the MCP container working memory use is over 90% of the limit for 5 mins
|BasedOn=container_memory_working_set_bytes, kube_pod_container_resource_limits_memory_bytes
|Threshold=15mins
}}{{PEAlert
|Alert=ContainerMemoryUseOver7GBForMCP
|Severity=HIGH
|AlertDescription=The trigger will flag an alarm when the MCP container working memory has exceeded 7GB for 5 mins
|BasedOn=container_memory_working_set_bytes
|Threshold=15mins
}}{{PEAlert
|Alert=ContainerRestartsOver2ForMCP
|Severity=HIGH
|AlertDescription=The trigger will flag an alarm when the MCP container restarts exceeded 2 for 15 mins
|BasedOn=kube_pod_container_status_restarts_total
|Threshold=15mins
}}{{PEAlert
|Alert=MCP_MEDIA_ERROR_CRITICAL
|Severity=CRITICAL
|AlertDescription=Number of LMSIP media errors exceeded critical limit
|BasedOn=gvp_mcp_log_parser_eror_total {LogID="33008",endpoint="mcplog"...}
|Threshold=30mins
}}{{PEAlert
|Alert=NGI_LOG_FETCH_RESOURCE_TIMEOUT
|Severity=MEDIUM
|AlertDescription=Number of VXMLi fetch timeouts exceeded limit
|BasedOn=gvp_mcp_log_parser_eror_total {LogID="40026",endpoint="mcplog"...}
|Threshold=1min
}}{{PEAlert
|Alert=NGI_LOG_FETCH_RESOURCE_ERROR
|Severity=MEDIUM
|AlertDescription=Number of VXMLi fetch errors exceeded limit
|BasedOn=gvp_mcp_log_parser_eror_total {LogID="40026",endpoint="mcplog"...}
|Threshold=1min
}}{{PEAlert
|Alert=NGI_LOG_PARSE_ERROR
|Severity=WARNING
|AlertDescription=Number of VXMLi parse errors exceeded limit
|BasedOn=gvp_mcp_log_parser_eror_total {LogID="40028",endpoint="mcplog"...}
|Threshold=1min
}}{{PEAlert
|Alert=NGI_LOG_FETCH_RESOURCE_ERROR_4XX
|Severity=WARNING
|AlertDescription=Number of VXMLi 4xx fetch errors exceeded limit
|BasedOn=gvp_mcp_log_parser_eror_total {LogID="40032",endpoint="mcplog"...}
|Threshold=1min
}}{{PEAlert
|Alert=MCP_WEBSOCKET_TOKEN_CREATE_ERROR
|Severity=HIGH
|AlertDescription=There are errors creating a JWT token with a websocket client
|BasedOn=gvp_mcp_log_parser_eror_total {LogID="40026",endpoint="mcplog"...}
|Threshold=N/A
}}{{PEAlert
|Alert=MCP_WEBSOCKET_TOKEN_CONFIG_ERROR
|Severity=HIGH
|AlertDescription=There are errors getting information for Auth token with a websocket client
|BasedOn=gvp_mcp_log_parser_eror_total {LogID="40026",endpoint="mcplog"...}
|Threshold=N/A
}}{{PEAlert
|Alert=MCP_WEBSOCKET_TOKEN_FETCH_ERROR
|Severity=HIGH
|AlertDescription=There are errors fetching Auth token with a websocket client
|BasedOn=gvp_mcp_log_parser_eror_total {LogID="40026",endpoint="mcplog"...}
|Threshold=N/A
}}{{PEAlert
|Alert=MCP_WEBSOCKET_CLIENT_OPEN_ERROR
|Severity=HIGH
|AlertDescription=There are errors opening a session with a websocket client
|BasedOn=gvp_mcp_log_parser_eror_total {LogID="40026",endpoint="mcplog"...}
|Threshold=N/A
}}{{PEAlert
|Alert=MCP_WEBSOCKET_CLIENT_PROTOCOL_ERROR
|Severity=HIGH
|AlertDescription=There are protocol errors with a websocket client
|BasedOn=gvp_mcp_log_parser_eror_total {LogID="40026",endpoint="mcplog"...}
|Threshold=N/A
}}{{PEAlert
|Alert=MCP_SDP_PARSE_ERROR
|Severity=WARNING
|AlertDescription=Number of SDP parse errors exceeded limit
|BasedOn=gvp_mcp_log_parser_eror_total {LogID="33006",endpoint="mcplog"...}
|Threshold=N/A
}}
}}